| PREVIOUS | HOME | LINKS | NEXT |
| Previously Owned Knives | |
 |
Terry Guinn Ring Fighter; Titanium body, 4.5 inch S30V blade, 10.5 inch OAL, pocket clip. Made in collaboration with EDC Knives. #009. |
 |
Pabu Knife Balisong; hollow ground damascus blade, bone scales |
|
|
Microtech Dragonfly Balisong; 3.5 inch 154-cm blade, aluminum body. |
|
|
Knivfabriken Gnos Jo balisong. 3.5 inch blade, 8.25 OAL, aluminum body. |
|
|
Pandayan Blades; Filipino 2 inch blade, 5.3 inch OAL |
|
|
FHM; 4 inch blade |
|
|
FHM; 3 inch blade |
|
|
Microtech Halo/AP; 4 inch 154-cm blade, 9.5 inch OAL, aluminum body. 6/98 |
|
|
Microtech Halo III; 4 inch 154-cm black coated blade , 9.5 inch OAL, aluminum body. |
|
|
Microtech LCC D/A; 3.5 inch 154-cm blade, green micarta scales |
|
|
Microtech Vector; coil spring automatic, 3 inch 154-cm blade, 7.25 inch OAL, aluminum body with winewood inserts. |
|
|
Microtech Amphibian; single action automatic, 3.75 inch 14-4CrMo blade, 8.25 inch OAL, aluminum body, rubber insets. |
|
|
Microtech Socom Elite Custom; single action automatic, 3.75 inch 14-4CrMo blade, aluminum body, ray skin insets, high polish blade. |
|
|
James Brothers Sandshark D/A OTF; 4 inch blade, 9.5 inch OAL, aluminum body |
 |
Dalton Ranger; OTF, 3.5 inch blade, 10.5 inch OAL, aluminum body. |
 |
Kershaw Boa; speed safe opening, 3.5 inch S30V blade, 8.25 OAL, titanium body with liner lock. |
 |
Kershaw Bump; speed safe opening, 3.5 inch S30V blade, 8.25 OAL, titanium body with frame lock. |
|
|
Benchmark Rolox Diamondback; Wood scales, 3 inch blade length, 7.5 inch OAL. |
|
|
Benchmark Rolox Viper; Demo model, clear plastic scales, 2.5 inch blade length, 6.5 inch OAL. |
|
|
Benchmark Rolox Viper; Wood scales, 2.5 inch blade length, 6.5 inch OAL. |
|
|
Benchmark Rolox Sidewinder; Black Micarta scales, 2 inch blade length, 5 inch OAL. |
|
|
Benchmark Rolox Sidewinder; Ivory micarta scales, 2 inch blade length, 5 inch OAL. |
 |
Rekat Sifu; Bladeforums Edition. ATS-34 5 inch blade |
 |
Gerber Paul; 2.5 inch blade, stainless body, micarta scales, Paul lock. |
 |
Don Fogg Shiv: 5 inch forged, clay tempered blade, 10 inch OAL, cord wrap. |
 |
J. Neilson BFH-2: 5 inch forged convex grind 5160 blade, 10.25 inch OAL, leather wrap handle. |
 |
Ed Caffrey EBK; 3 inch blade, 1084 steel, 6.5 inch OAL |
 |
Rick Lowe Utility Knife; 2.25 inch forged 5160 blade with curly tambootie scales, 6.75 OAL |
 |
Dan Peterson Mastersmith Fighter; 10.25 inch three bar damascus blade, OAL 15.75 inch |
 |
Butch Vallotton 'California Clip Hunter'. A rare fixed blade from the master of the automatic knife! |
 |
Ken Steigerwalt Fighter; rare fixed blade fighter by a master of the folder! Ivory scales |
 |
Ken Steigerwalt Hunter; rare fixed blade hunter by a master of the folder! Stag and Burl scales |
 |
Ken Steigerwalt Dagger; rare fixed blade dagger by a master of the folder! Wood scales |
 |
Ken Steigerwalt Coffin Handled Bowie; 10 inch blade, 15.5 OAL. Not the type of blade Ken makes these days! |
 |
Ken Davis Maple/Humpback Skinner; 3.75 inch Chuck Hawes chain damascus blade 3/16 stock, nickel silver guard, amboynia burl spacer, tiger stripe maple, Joe Henry custom sheath |
 |
Ken Davis Ironwood Hunter; 4" ATS-34 blade. 9 inch OAL. Mokume bolsters, ironwood scales. Fancy cape buffalo sheath |
 |
The RKS Third Club
Knife Issue, RKS3: From the Randall Knife Society Web Site; This knife was first offered to the membership in 1997. 860 knives were made. The 5-3/4 inch blade is a slightly smaller version of the 1988 issue of the Randall 50th Anniversary Commemorative Knife, which had a 7-1/2 inch blade. Very similar in shape, blade wise, you will once again, see and feel, the strong influence of Bill Scagel on Bo Randall's early knives. The 5-3/4 inch blade is of imported Swedish 01 tool steel and shows vividly the late 1930's shape of the early Randall blade. The brass guard is much smaller than what you would see, say on a Model 3, again showing an early Randall look. Stag handle with a 9/ 16 inch (compass size) Randall Knife Society club medallion in the butt. The price was $320.00 (sold out) |
 |
Steve Mullin Pack River Knives Hunter; 3.5 inch damascus blade, wood handle, OAL 8.25 inches. |
 |
Jason Cutter Kozuka. |
 |
Jason Cutter Eastern Hunter. |
 |
REKAT/ Simonich Pikuni |
 |
Takeshi Saji Samurai; 5.5 inch Tasou-kou laminate steel blade. 9.5 inch OAL, rattan wrapped handle |
 |
Steve Mullin Pack River Knives Fighter; 7.75 inch blade, sharpened false edge, micarta handle, OAL 13 inches. |
 |
Mick Langley Mastersmith Bowie; 5160 flat ground blade 5.25 inch, OAL 10.5 inch. Full tang with file work, carved nickel silver bolsters and beautiful stag scales. |
 |
Mick Langley Mastersmith Bowie; 1084 flat ground blade 5.5 inch, OAL 10.5 inch. Full tang with carved nickel silver bolsters and ebony scales. |
 |
Rob Patton Batwing; 4 inch damascus blade, 8.75 inch OAL. Polished stag scales, fully fileworked |
 |
Mike Zima Hunter; 3.5 inch mirror polished ATS-34 blade, OAL 7.75 inch. Stag Scales with carved buttcap. Rope file work on top of blade. An incredibly well made knife. |
 |
David Brodziak Chef Knife; 12 inch Garry Wood Damascus blade, Flame Mulga handles |
 |
Glestain Gyuto; 10.5 inch blade. 15 inch OAL |
 |
Takeshi Saji Custom Chef Knife: San mai blade, stag scales |
 |
Japanese Petty Knife; Unknown maker, thick damascus blade |
|
